• 8 HDMI™ 2.0 (18 Gbps bandwidth allowing up to 4K60p 8-bit 4:4:4 or up to 4K60p 12-bit 4:2:2 or up to 4K30p 12-bit 4:4:4)
• 4x DisplayPort 1.2 (21.6Gbps bandwidth allowing up to 4K60p 10-bit 4:4:4 or up to 4K60p 12-bit 4:2:2)
• 4x 12G-SDI (up to 4K60p 10-bit 4:2:2) - also compatible with 3G-SDI and 6G-SDI (can be optionally replaced by 4x 12G-SDI + 1x 2.5GbE NDI-enabled port - ref. OPT-AQL-IN-IP-SDI)

• All input connector cards can be field-replaced to accommodate a variety of connectivity arrangements
• Field swappable input connector cards available separately: 8x HDMI™ 1.4 (upgradable up to 32x Dual/2K inputs), HDMI™ 2.0, DP 1.2, 12G-SDI, NDI+12G-SDI, SFP+, Optical, SDVoE
• Supports 4K60p input as single, double or quad plugs (incl. 4x 3G‑SDI 2SI)
• Supports input formats such as 8192×1080@60p (aka “8k x 1k”) on a single connector
• Connector status LEDs for easy troubleshooting

12 active 4K60p outputs via 3 pre-installed output connector cards:

• 12x HDMI™ 2.0 (18 Gbps bandwidth allowing up to 4K60p 8-bit 4:4:4 or up to 4K60p 12-bit 4:2:2 or up to 4K30p 12-bit 4:4:4)

• All output connector cards can be field-replaced to accommodate a variety of connectivity arrangements
• Field swappable connector output cards available separately: HDMI™ 2.0, DP 1.2, 12G-SDI, SFP+, Optical, SDVoE
• Supports 4K60p output as single, double or quad plugs
• Supports custom output formats such as 8192×1080@60p (aka “8k x 1k”) on a single connector
• Connector status LEDs for easy troubleshooting

• 2 dedicated HDMI™ 2.0 outputs configurable as up 2x 4K30p or up to 2x 2560x1440@60p or 1x 4K60p (version available separately with 2 Multiviewers DP 1.2 outputs, each compatible with the DPH104 video processor)
• 64 resizable widgets on each output

• Customizable layouts with 50 memories
• Monitor inputs, still images, screens (Program and Preview) as well as inboard clocks/countdown/timers

‍

• Audio de-embedding/embedding on every input & output (raw audio)
• De-embedded audio channels can be routed directly to the Dante™ network using onboard Dante™ card

• Audio channels from external Dante™ audio processor can be re-embedded for sending to display, streaming or recording device
• 64x64 Dante™ channels @48 kHz or 32x32 Dante™ channels @96 kHz
• Dual redundancy Ethernet ports - AES67 support

• Outputs configurable as single screens or edge-blended widescreens
• Up to 12x Dual/2K60p program outputs or up to 8x 4K60p program outputs cloneable to any other unused outputs
• Flexible layer management: various content sizes (2K, 4K, …), Region Captive PiPs for resource optimization, screens without layers (background only)
• Any unused output configurable as a scaled auxiliary 4K60p output to display any input, screen (1:1 or scaled) or inboard clocks, timers and countdowns

• Ability to create resizable layers on auxiliary outputs without using processing resources (adjacent outputs can be used to increase the number of available layers)
• 500 master memories, 1000 screen memories and 50 layer memories
• 3 possible startup configurations: blank, last known state or selected Master Memory

• Supports mixing layers (true seamless transitions) and split layers (cut transitions)
• Up to 8x 4K or 16x Dual/2K mixing layers (16x 4K or 32x Dual/2K split layers) depending on screens setup
• Layer source can be a live input, a still image, a screen PGM (for split layers only) or any of the inboard clocks, countdown and timers

• Each output has an unscaled background mixer supporting seamless transitions
• Background source can be still image or live source

‍

• Based on Analog Way exclusive 5th generation scaling engine
• Extremely low latency, as low as 1 frame in proper configuration
• 80 Megapixels throughput at 10 bits 4:4:4 @60Hz on Program, without restricting Preview or Multiviewer

• Real-time SDR/HDR10/HLG conversion and color correction based on 3D-LUTs
• High-end input keying algorithms: Luma-Key, Chroma-Key and 3D LUT based CremaTTe 3D (requires AW CremaTTe 3D software available on the website), Cut and Fill
• Advanced motion compensation deinterlacing
• BT.601; BT.709; BT.2020 color spaces
• Compatible with HDCP 1.4 and HDCP 2.2

• 2 dedicated HDMI 2.0 outputs configurable as up 2x 4K30p or up to 2x 2560x1440@60p or 1x 4K60p (version available separately with 2 Multiviewers DP 1.2 outp
• Supports any combination of single-screen or widescreen applications
• Ability to place the program outputs anywhere on an almost limitless video canvas space for special LED wall applications
• Compatible with Analog Way DPH104 video processor: easily convert one 4K DP 1.2 output to four independent full HD outputs (requires a DP 1.2 output card)

• Custom output formats for non-standard display applications
• Independent resolution and rate on all outputs
• Rotation capability in increments of 90°
• Area of Interest option to customize active areas of outputs
• Advanced pixel pitch management & bezel compensation

• Supports any combination of up to 4 interconnected LivePremier devices
• Composed of a specific internal link card and a QSFP+ interface card installed in the lowest slot of each device
• Ability to add the outputs to a device in a single mode by replacing the QSFP connector card by any output card

• True A/B Mix
• Misc. layer border effects/colors and separate shadow
• Transitions: Cut, Fade, Slide, Wipe, Circle, Stretch, Depth, Flying layer movement with programmable paths

• Layer effects: Transparency, H&V Flip, Cut and Fill
• Colors effects: B&W, Negative, Sepia and Solarize_‍‍

• 12x 4K or 24x 2K concurrent still images - fully resizable
• Still images support alpha-channel
• Still image library with 100 memories

• Multi-file download/upload via Web RCS
• Capture from live inputs, outputs and multiviewers

‍

• Web RCS: embedded intuitive drag and drop HTML5-based interface, with live video thumbnails, multi operator real-time collaboration and password protection
• RC400T: powerful event controller
• AW VideoCompositor: Premium drag & drop Crestron® GUI
• Shot Box²/Control Box³: Cost effective control solutions

• Simple REST API and advanced TCP protocol based on JSON
• Crestron and AMX drivers
• Q-SYS control plugin

‍

• Highly ruggedized chassis with cleanable air filter
• Swappable redundant power supplies
• Quiet: 49dB average noise at 1m when ambient temperature is less than 32°C/90°F
• Dedicated BNC with loop out for Framelock, blackburst and tri-level sync

• EDID management on every input and output
• Backup and restore functions
• Tally/GPI-O
• Fully functional simulator for offline configuration and practice
• Expansion via simple linking possible (future hardware upgrade)